Progressive TD92 Rotary Finishing Mower

The Progressive TD92 Tri-Deck Rotary Finishing Mower was designed to be used with the popular 50 HP tractor. This combination will provide the most cost effective system on today's market. Not only will it increase your productivity with fewer man hours, but you will obtain a quality of cut that is second to none. Workinglike3 independent cutting units, the Progressive TD92Tri-Deck rides on large floatation tires following the ground contours -cutting a 22 ft. wide swath - at speeds up to 7 1/2 mph. Our high lift rotary blades create a powerful vacuum that lifts the grass for a clean even cut and then disperses the clippings evenly through the rear discharge system without leaving windrows, in both wet and dry conditions .Along with these quality features you get a machine that is simple to operate and easy to maintain.

Technical Specifications

Cutting Width	22 feet
Cutting Height	Easy to use spacer bushings allow adjustment
	From ¾" to 5" - 3/8 steps
Recommended PTO	HP 45 min- 70 max. PTO
Hydraulics	Requires one double acting outlet, all hoses supplied to tractor.

Transport Dimensions	Length		Width	Height
	16 feet		9 ½ feet	10 feet

Ground Clearance	9 ¼"
Ground Pressure	7 pounds per square inch
Tire to Ground	630 square inches of contact
Deck Flexibility	25° up to 15° down, 12° front to back
360 Degree Turn	0" uncut circle
Number of Tires	10 on deck, 2 transport on main frame
Weight	4100 ponds

Mowing Capacity	Speed (MPH)	2	4	6	7 ½
	Acres Per Hour	5.4	10.7	16	20

Paint Finish	Electrostatically painted with oven baked finish
SMV Sign	Located at the back of mower for safety

DECK (ALL REAR DISCHARGE)
Deck Drive	PTO shaft to right angle gear box driving 2-"B" selection belts to 3 heavy duty spindles.
Belt Adjustment	Easily made by loosening four bolts at gear box base and adjusting side plate.
Deck Construction	A single PC 3/16" steel plate formed and welded with supporting members at high stress areas to achieve maximum structural strength. Disk is 5" deep
Spindles	9 spindles, 35mm diameter spindles are each carried in 2 greasable ball bearings which are housed in precision machined hub.
Blade Support	¾" x 2 ½" x 11 ½" bolts hold blade ridged to provide a clean level, cut
Blades	High lift, heat treated, alloy steel blades 5/16" x 2 ½" x 32" - 3 per deck
Speeds	Tractor PTO-540 RPM
	Blades - 3040 RPM
	Blade Tip Speed - 18,287 F.P.M.
Castors	18 x 9.50 x 8 NHS, 4 ply pneumatic tires mounted on 5 bolt wheels. All hubs are replaceable, interchangeable and greasable. Replaceable castor pivot bushings.

FRAME
"A" Frame	Hollow structural steel tubing with supports at high stress areas to achieve maximum strength.
Axles	Rated at 4000 lbs. each and are greaseable.
Wheels	6 bolt, 6" bolt circle
Transport tires	P275/60SR 15" automotive radials.
Hitch	4 positions, with height settings from 10 ½" to 15", Safety chain with hook according to Dept. Of transport regulations.
Tongue Weight	Transporting -965 Pounds
	Mowing - 360 Pounds
Cylinders	Rear deck: 1 - 2 ½" x 16" double acting
Wing decks	2-3" x 16" double acting
Screw jack	2000 lbs top wind jack for easy hook up
Main Gear Box	4 shaft gear box with 1 3/8" - 6 spline shafts, delivering power to decks.
PTO Shafts	quick disconnect yokes on both ends with ring lock collars
	Input PTO... Category #6
	Deck PTO... Category#4
Options	Low lift blades
	Anti-scalp roller kit (6 pieces)